Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who appreciates the nimble heating control of gas cooktops, but requires an electric oven to bake? Discover a dual fuel range cooker that offers the best of both worlds.
Gas cooktops are the preferred choice of many home chefs with expertise in the kitchen because of their superior temperature control. They also allow them to use advanced cooking techniques like charring. These stoves are expensive, particularly when you need an additional gas hook-up as well as an electrician for installation.
What is a 13amp plug?
If you have dual fuel range cooker (also called a gas and electric oven) then you'll require an appropriate 13 amp plug. The plug also needs to be wired hard into the cooker circuit using a qualified electrician.
This ensures that the flow of current through the plug doesn't exceed the limit of safety that could result in an electrical fire. The plug is equipped with a fuse that controls the current. The fuse will blow when it is overloaded. This protects the appliance from an overload of electricity.
The fuse is rated at 13 amps, as shown on top of the plug. This indicates the maximum amount of current that the plug could pass without damaging the appliance or heating the socket. It is important to ensure that when replacing fuses, you always use the same amps as the original. If you replace the fuse using one with an alternative rating, you are at risk of overheating the socket, and potentially putting yourself and others in high risk.
Ceramic 13 amp fuses are very robust and can withstand the high temperatures that can be generated by the range cooker. Ceramic elements are also fire-resistant and thus a better choice than other types.
There are many ways in which 13 amp plugs can be fitted. It may be wired to an existing live socket, and the flex then connected to it using a screw or plastic jaw type cord clamp. The plug must be pushed firmly into place and tightened, making sure the cord clamp is secure.
Before connecting the wires, you may have to remove the wiring diagram on cardboard which is placed over the pins of some plugs. The wires must be trimmed to the proper length, because when they are too long they can get crushed when plug covers are changed. The earth wire must be the longest in order to connect it before the neutral and line pins.
How do I connect a 13amp plug?
The vast majority of dual fuel range cookers sold in UK are powered by a 13 amp plug. This is vital since ovens draw significant current, and standard plug sockets only have a 10-amp rating.
In general new appliances must be fitted with a plug at the point of sale. This is in order to be in compliance with the Plugs and Sockets etc. (Safety Regulations) 1994. silver dual fuel range cookers might not have a plug connected and this is the problem.
When connecting the cooker to an existing plug socket, the first step is to ensure that the rating of the fuse inside the fuse box is in line with the plug's rating. This is important because an incorrectly-sized fuse can be dangerous.
It is also recommended to ensure that the fuse is completely seated into the cartridge, and there isn't any excessive movement. The next step is to prepare the flex that is to be used. The first step is to remove the sheathing from the flex to expose the three conductors insulated within. Then, nick the sheathing at the point of entry to the plug (beyond the cord grip) with a utility knife without penetrating the individual conductors that are insulated. This nick must be large enough to allow for the cable and sheathing to separate when the sheathing is pulled back. Finally, cut off the excess sheathing and leave about 40mm over the flex end.
The flex is positioned over the plug with the earth terminal at the top, and the live and neutral terminals at the bottom. The sheathing of each pin is removed using coloured conductors as a guide. The internal cable is then secured into the terminal using the cord grip. If the plug has a cord clamp that is screw-type, loosen it and then pull the insulation back to expose the copper wires. Connect each wire that is insulated to the correct terminal by using the channel inside the plug. Start with the earth conductor and then the neutral and finally, the live.
What is the maximum draw of a 13 amp plug?
The maximum power draw of an 13amp plug is 3kw at 230 volts. This is quite a bit of power, however the standard fuse fitted in the UK plug will not fail until the cable has heated to a dangerous temperature. A damaged plug or socket may result in a fire, so it's important to keep an eye on how much power you use particularly in the kitchen.
The fuse inside the plugtops are made of ceramic, around 25mm in length and rated for 240V mains. They'll have the BS kitemark or similar marking on the side, and they contain sand. There are cheaper glass or plastic alternatives, but they should not be used with a live plug, unless you want to blow up the fuse and possibly be electrocuted!
The majority of dual fuel range cookers sold in the UK need to be hard-wired and are not able to plug directly into the wall socket. They are usually connected to a dedicated cooker ring circuit, which is only suitable for appliances that draw up to 20 amps.
Check the ring circuit of your home by using the fuse box, or ask a local electrician. They should be able to tell you if the sockets within your home are connected to the same ring, or if they are separate and whether there is a separate circuit for your oven.
The size of your kitchen is one of the main factors when you decide to buy a dual fuel range cooker. We have a great range of cookers that will fit any space, including small 50-60cm dual fuel models and vast 90cm + double oven options from top brands like Rangemaster and StovesAreUs.
We also have a wide range of multifunction gas and electric cookers. These versatile machines allow you to cook a variety meals, including casseroles, pasta, and curries.
Explore our entire range of Cookers in Currys online or visit us in-store for a look. We provide free home delivery and installation on select range cookers, as well as flexible payment options. Our team is available to answer any questions you may have. Contact us via email or by phone. Credit is subject to status, and terms & conditions apply.
What is the maximum current draw of a cooker switch?
There is a lot of confusion regarding the maximum current draw for a cooker switch. The fact is, most cookers are not designed to plug into the standard socket, but instead are wired hard and fed into a dedicated oven ring circuit. This is because they often draw more than 20 amps of power when the electric oven and gas hob are used.
You will not find dual fuel range cookers that are able to be fitted in a standard socket because this could create an enormous fire risk and would violate electrical regulations. A licensed electrician will install any new electrical wiring to a cooker in the kitchen, and they will ensure that the total load (both the hob and oven) does not exceed the supply capability of the circuit.
Dual fuel range cookers blend the flexibility of a gas stove with the precision and accuracy of an electric oven. This is why they are well-liked by chefs and home cooks alike. If you are looking to experiment with different cooking techniques such as searing and charcoaling, a dual fuel range cooker is the perfect choice.
When you are looking to purchase a new range cooker, you'll have to consider various aspects such as size, functionality and price. Additionally, you'll also need to make sure that your house has the right gas hook-up for the appliance. If you're unsure you're not sure, it's recommended to have an Gas Safe engineer inspect your home prior to installing.
The Currys range of dual fuel range cookers has options that can be adapted to a range of budgets, from basic models from Indesit and Zanussi to our own exclusive Essentials collection. If you are looking for something more advanced, we stock a variety of top JennAir models, that come with a number innovative features.
It is crucial to read the owner's guide prior to purchasing a dual fuel range cooker. It will provide you with specific details regarding the electrical and gas requirements. You will need an electric connection to your home. A plumber may be required to set it up for you. You may also need a cooker-ring circuit that is installed by an experienced electrical engineer.